MMP 25A-48V Motor Speed
Control
Reliable
•
Designed to control the Speed of a Standard 48 Volt (36-60V) Brushed DC Motor.
•Maintenance free, Time Tested Design, Solid State Circuitry, minimal EMI / RFI Noise
•Potted, Rugged Construction Design for Harsh Environments. (IP65 Rated)
Versatile
• Operates from 36 to 60 VDC; Battery or other DC Supply** - to ++25Amps Continuous
Current.
•Peak “momentary” Current is 40 Amps (1-2 Seconds Max).
•Easily Installed to any flat “Heatsinking” surface – Two Mounting Holes.
•Output Pulse Width can be Varied for 0% to 98% Duty Cycle, switches at 22 KHz.
•Compact Size - 4.5” by 2” By 1.5” High—Weight is 9.7 OUNCES
•12 Volt and 24Volt DC Design also available*
Economical
•Low Cost, Time-Proven Reliability, very low ripple output
•Electronic Design Offers Longer Life than Mechanical Switches.
•Solid State Design with State of the Art Components.
•
Designed to control the Speed of a Standard 48 Volt (36-60V) Brushed DC Motor.•
Maintenance free, Time Tested Design, Solid State Circuitry, minimal EMI / RFI Noise •
Potted, Rugged Construction Design for Harsh Environments. (IP65 Rated)
Versatile
• Operates from 36 to 60 VDC; Battery or other DC Supply** - to ++25Amps Continuous
Current.•
Peak “momentary” Current is 40 Amps (1-2 Seconds Max).•
Easily Installed to any flat “Heatsinking” surface – Two Mounting Holes.•
Output Pulse Width can be Varied for 0% to 98% Duty Cycle, switches at 22 KHz. •
Compact Size - 4.5” by 2” By 1.5” High—Weight is 9.7 OUNCES•
12 Volt and 24Volt DC Design also available* Economical
•
Low Cost, Time-Proven Reliability, very low ripple output •
Electronic Design Offers Longer Life than Mechanical Switches. •
Solid State Design with State of the Art Components.
Operation
The MMP 25A-48V Motor Speed Control operates on 36-60Volts DC. Battery power or a regulated DC Power Source** is acceptable. It is designed to control the output speed of a Brushed PM DC motor, by varying the output pulse width from 0% to 98% duty. The MMP 25A-48V is easy to use, having just 7 “faston” interconnects— two for DC Input power, two for the motor, and three for the ?epre-wired?f speed control potentiometer, one of which is included with each unit.
Also accepts 0- 5 VDC Analog command.
The MMP 25A-48V Motor Speed Control operates on 36-60Volts DC. Battery power or a regulated DC Power Source** is acceptable. It is designed to control the output speed of a Brushed PM DC motor, by varying the output pulse width from 0% to 98% duty. The MMP 25A-48V is easy to use, having just 7 “faston” interconnects— two for DC Input power, two for the motor, and three for the ?epre-wired?f speed control potentiometer, one of which is included with each unit.
Also accepts 0- 5 VDC Analog command.
Typical Applications
Agricultural ~ Automated Guided Vehicles ~ Automotive & Transportation ~ Battery Powered Robots ~ Chemical Feeder ~ Compressors ~ Conveyors ~ Fans & Blowers ~ Food Processing ~ Gear Motors ~ Hose & Cable take-up Reels ~ Paper Processing ~ Photo Processing ~ Portable Instruments ~ Pumps ~ RV’s ~ Ventilators ~ Vibratory Feeders ~ Wire Feeders
Agricultural ~ Automated Guided Vehicles ~ Automotive & Transportation ~ Battery Powered Robots ~ Chemical Feeder ~ Compressors ~ Conveyors ~ Fans & Blowers ~ Food Processing ~ Gear Motors ~ Hose & Cable take-up Reels ~ Paper Processing ~ Photo Processing ~ Portable Instruments ~ Pumps ~ RV’s ~ Ventilators ~ Vibratory Feeders ~ Wire Feeders
This product is specifically designed for and is well suited for alternative energy applications including
propulsion systems for electric, hybrid electric, and fuel cell electric vehicles, 42 Volt under-the-hood
power accessories and other vehicular auxiliary & accessory applications.