MMP 25A-24V Motor Speed Control
Reliable
•
Designed to control the Speed of a Standard 24 Volt (20-28V) Brushed DC Motor.
•Maintenance free, Time Tested Design, Solid State Circuitry, minimal EMI / RFI Noise
•Potted, Rugged Construction Design for Harsh Environments. (IP65 Rated)
Versatile
•Operates from 20 to 28 VDC; Battery or other DC Supply
•Peak “momentary” Current is 40 Amps (1 Second Max)
•Easily Installed to any flat surface – Two Mounting Holes
•Output Pulse Width can be Varied for 0% to 98% Duty Cycle, switches at 22 KHz.
•Compact Size - 4.5” by 2” By 1.5” High.
•12 Volt DC Design also available*
Economical
•Low Cost, Time-Proven Reliability, very low ripple output
•Electronic Design Offers Longer Life than Mechanical Switches.
•Solid State Design with State of the Art Components.
•
Designed to control the Speed of a Standard 24 Volt (20-28V) Brushed DC Motor. •
Maintenance free, Time Tested Design, Solid State Circuitry, minimal EMI / RFI Noise •
Potted, Rugged Construction Design for Harsh Environments. (IP65 Rated)
Versatile
•
Operates from 20 to 28 VDC; Battery or other DC Supply•
Peak “momentary” Current is 40 Amps (1 Second Max)•
Easily Installed to any flat surface – Two Mounting Holes •
Output Pulse Width can be Varied for 0% to 98% Duty Cycle, switches at 22 KHz. •
Compact Size - 4.5” by 2” By 1.5” High. •
12 Volt DC Design also available*
Economical
•
Low Cost, Time-Proven Reliability, very low ripple output •
Electronic Design Offers Longer Life than Mechanical Switches. •
Solid State Design with State of the Art Components.
Operation
The MMP 25A-24V Motor Speed Control operates on 20-28 Volts DC; Battery power is acceptable It is designed to control the output speed of a Brushed PM DC motor, by varying the output pulse width from 0% to 98% duty. The MMP 25A-24V is easy to use, having just 7 “faston” interconnects— two for 24 Volt power, two for the motor, and three for the ‘pre-wired’ speed control potentiometer, one of which is included with each unit.
Also accepts 0- 5 VDC Analog command.
The MMP 25A-24V Motor Speed Control operates on 20-28 Volts DC; Battery power is acceptable It is designed to control the output speed of a Brushed PM DC motor, by varying the output pulse width from 0% to 98% duty. The MMP 25A-24V is easy to use, having just 7 “faston” interconnects— two for 24 Volt power, two for the motor, and three for the ‘pre-wired’ speed control potentiometer, one of which is included with each unit.
Also accepts 0- 5 VDC Analog command.
Typical Applications
Agricultural ~ Automated Guided Vehicles ~ Automotive & Transportation ~ Battery Powered Robots ~ Chemical Feeder ~ Compressors ~ Conveyors ~ Fans & Blowers ~ Food Processing ~ Gear Motors ~ Hose & Cable take-up Reels ~ Paper Processing ~ Photo Processing ~ Portable Instruments ~ Pumps ~ RV’s ~ Ventilators ~ Vibratory Feeders ~ Wire Feeders
Agricultural ~ Automated Guided Vehicles ~ Automotive & Transportation ~ Battery Powered Robots ~ Chemical Feeder ~ Compressors ~ Conveyors ~ Fans & Blowers ~ Food Processing ~ Gear Motors ~ Hose & Cable take-up Reels ~ Paper Processing ~ Photo Processing ~ Portable Instruments ~ Pumps ~ RV’s ~ Ventilators ~ Vibratory Feeders ~ Wire Feeders